• Phone: +91 9426035613
  • contact@arihantcorporation.co.in

Omnilube 60, 60AR, 100, 180, 180AR, 300, 350, 550 & 850

Omnilube 60, 60AR, 100, 180, 180AR, 300, 350, 550 & 850


Applications:
  • Omnilube 60 & 100 are fully synthetic lubricants designed specifically for use in powder metal sleeve bearings operating at cold ambient conditions. They are suited for use in refrigerator frost free fan motors that must operate at cold temperatures, and yet protect the bearing as bearing and shaft temperatures increase.
  • Omnilube 180 was developed specifically for powder metal bearings in electric motors where compat- ibility with plastics such as polystyrene or other plastic material is required. This premium lubricant is typical of all Ultrachem® Impregnating Oils in their cleanliness, longevity, wide useful temperature range and low volatility. The Omnilube product line should be evaluated for cost effectiveness where silicone fluids have been employed or the use of plastic materials has been restricted due to lubricant incompatibility.
  • Omnilube 300 & 350 were developed specifically for powder metal bearings in electric motors where compatibility with plastics such as polystyrene or other plastic material is required. These premium fluids are typical of all Ultrachem Impregnating Oils in their cleanliness, longevity, wide useful tempera- ture range and low volatility.
  • Omnilube 300G and 350G are formulated with the addition of colloidal graphite, which has been milled to an average particle size of 0.5 micron. These versions help eliminate dry startups, chirping or squeaking at low temperatures, and reduce wear in high wear applications. The graphite addition does not change the typical properties listed below.
  • Omnilube 550 is a heavier version of our other Omnilubes. Compatible with a wide variety of plastics, Omnilube 550 is designed for use in powder metal sleeve bearings, felts, wicks, and gears that require a more viscous fluid than Omnilube 100, 300, or 350.
  • Omnilube 550G is formulated with the addition of colloidal graphite, which has been milled to an aver- age particle size of .5 micron. This version helps eliminate dry start-ups, chirping or squeaking at low temperatures, and reduces wear in high wear applications. Omnilube 850 is not available with graphite.
Typical Industrial Applications:
  • Impregnating Lubricant, Refrigerator Frost Free Motors, Electric Motors
Performance Benefits:
  • Compatible with many plastics we have tested, including several polystyrene and Noryl compounds, Inhibited to prevent oxidation, High viscosity index, Extreme long life, Non-gumming, Fortified against corrosion and rust, Omnilube 300G & 350G: Containers should be mixed before opening or using for evenly dispersement, Omnilube 550G: Containers should be mixed before opening or using for even dispersement

 

Channel partners

Over 14 years of experience we’ll ensure you get the best Things.